About this Arc3 church pulpit and Arc3 table package
Receive free covers when you order this, our most refined pulpit and table combination.
The Arc3 pulpit and table are a radical departure from traditional geometric shapes. They use organic shapes (non primary shapes). This creates a more flowing appearance and dynamic feeling. It reflects the dynamic nature of church preaching.
Making organic shapes is much harder. It is even more tricky in stainless steel. We estimate that it is about eight times more difficult to make an Arc3 compared with an Arc2. In fact the organic shapes we wanted to make had never been achieved in stainless steel.
For a while we looked into other materials. That would have been much easier. But other materials are not as durable as stainless steel. We want the lectern to stand up to the strain of being used in a church for 20 years plus, and still look good. If we were to use a painted finish, a chip or scratch would need to be retouched. Stainless steel is raw, so a scratch or knock will not be noticed in the same way. Most marks can be removed by carefully rubbing with a heavy duty scotch brite pad from the supermarket (like you would use to clean pots and pans.)
In addition, stainless steel and clear acrylic (with anti reflective film) are what designers might call ‘raw finishes’ .
Unlike painted or applied finishes, raw finishes have a neutral appearance and are more likely to fit into a variety of church interiors. It can be a traditional cathedral, or a modern warehouse church building, raw finishes will still look good.
The Arc3 lectern has a large 70cm (28”) wide top. Lots of room for a large book of notes and a bible to sit side by side. If you need the top to be smaller, we can make a smaller 60cm/ 24” wide top for the same price. Please e-mail us.
The Arc3 lectern and table come with anti reflective film. This is particularly important if you have a projector screen behind the preacher (most churches do).
Click here for more information on anti reflective film.
They come flat (keeps the parts safer and avoids the cost of sending air). They require assembly. We provide the tools and we expect it to take you less than 5 minutes.
Like our other pulpits and tables, they are made by us here in Australia. It takes constant monitoring and problem solving to achieve our standards. We are pulpit specialists, so this is all we do. It takes commitment to this one thing to be able to make this difficult lectern at all, let alone to a high standard.
They are going to sit in the middle of your stage and your congregation are going to look at them every weekend. We need to be committed to do whatever it takes to get the best possible result. There is no way that this would be possible by sending it away to have someone else try to make it.
More about this church pulpit and water table package:
We tried 17 times to design a better lectern than the Arc2. 16 times our select customers said they preferred the Arc2.
It was fruitless and exhausting. I (Stephen) finally designed a lectern shape that was amazing looking but was impossible to make. We spent thousands of dollars and many hours painstakingly hand making a prototype. Our select customers loved it. They wanted to buy it. We had to find a way to make it at a reasonable price.
We spent 2 years of trial and error working out how to make it. It was impossible to make using conventional machines, so we had to make our own. We made machines from a metal cutting flame throwing torch, windscreen wiper motors from tractors, and more conventional parts. In the process, we had 11 suppliers say that various parts were not possible to make, produced 436 design drawings, and we set fire to a tree.
You receive free covers for the lectern top and table top, when you purchase this package. The covers are normally $40 each and are essential in protecting the tops when not in use.
Australian Made.
